News

       
  • Five Reasons to be Using Flange Quick Fittings

    07-04-2020

    Though there are specific applications where flanges and/or flange quick fitting are the only practical choice (particularly in larger, high pressure piping applications), flanges sometimes provide be...

  • How To Unclog And Clean Plastic Ball Valves?

    07-04-2020

    Unclogging Plastic Ball Valves The most obvious problem that occurs in plastic ball valve is blockage. This is noticeable because it causes pressure drop further in the system. Blockage can be buildup...

  • Why Use A Plastic Ball Valve Versus a Globe Valve?

    14-04-2020

    A valve is a device that controls, directs or regulates the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Various t...

  • How to Correctly Measure PP Fitting?

    14-04-2020

    Measuring the diameter of a pp fitting might seem quite straightforward at first – you just measure the diameter of the pipe. However, it's important that you measure the right diameter with the right...

  • How to Connect Pe Fitting?

    21-04-2020

    The pe fitting connection is PE pipe, pp pipe connection, according to the interface form and heating can be divided into two ways. 1 PE pipe connection form General requirements for installation Elec...

  • How to Improve the Hardness of PP Fitting?

    21-04-2020

    1. The plasticization of pp fitting must be high, and the plasticization should be as high as possible. As long as the decomposition does not change color, the plasticization can be properly improved,...