Below are the five factors you should consider when sel […]
Below are the five factors you should consider when selecting the right quick connect fitting for your application:
Versatility: The fittings offer the best versatility of any of the aforementioned fitting systems. Additionally, there are available fittings that can connect fittings to any foreign or American port, and jump sizes can expand or reduce between any sizes. A key benefit is the great variety of product that is typically stocked by vendors, including straights, elbows, long drops and male or female threads.
Availability: The fittings have been the field standard for decades, and they are readily available in both volume and variety. As a growing number of OEMs converts to O-ring face seals and DIN metric fitting styles, any hydraulic hose shop should be able to identify these new fittings, but the selection may be limited. Click here to find your local Parker distributor.
Pressure Rating: Many OEMs are choosing O-ring face seals and DIN metric fittings, as required pressure ratings have increased. The fittings are not rated for these pressure ratings, especially in high vibration applications. Similarly, NPT threads are not recommended for higher pressure. These applications require specially-rated fittings.
Application: The application in which a fitting will be used is a critical factor in choosing the right fitting. The STAMP acronym applies to fittings as well as it does to hose. Size, Temperature, Application, Media and Pressure all must be taken into consideration when making this choice. The STAMP process is integrated in Parker’s HoseFinder app.
Reliability: NPT pipe threads have always been popular, as leaks can be fixed by simply tightening the fitting. This practice, however, has led to cracked fittings. While JIC has been the industry standard for years, it still susceptible to cracked flares from overaggressive wrenching. The mated sealing surfaces in O-ring face seal fittings and DIN metric fittings reduce the risk of over torqueing, and provide greater reliability due to the elastomeric seal that is captured in the mating surface.